Hifax TYC 1152P JA6A Black very high melt flow, 2,000 MPa flexural modulus, low density mineral filled, thermoplastic elastomeric olefin (TEO) resin. Enables part weight reduction and associated savings while maintaining all of the performance of traditional, higher density products. It has an excellent balance of properties and processability, and is typically used for automotive bumper fascias and exterior trim applications.
Hifax TYC 1152P JA6A Black
Description
Availability
North America
Legend
SDS - Safety Data Sheet
PSB - Product Stewardship Bulletin
Product Data and Technical Information
| Melt Flow Rate (230 °C/2.16 kg) | 30 g/10 min |
| Density (23 °C) | 1.01 g/cm³ |
| Flexural Modulus (23 °C) | 2000 MPa |
| Tensile Stress at Yield (23 °C) | 20 MPa |
| Notched Izod Impact Strength (23 °C) | 35 kJ/m² |
| Notched Izod Impact Strength (-40 °C) | 3.5 kJ/m² |
| Mold Shrinkage |
Technical Data Sheet
Technical Data SheetProcess
Injection Molding
Resin
Polypropylene Compounds
Applications
Automotive Parts, Bumpers, Exterior Automotive Applications